Console Commands
Contents
Variables
bot_
| Command | Default | Parameters | Description |
|---|---|---|---|
| bot_dummy | 0 | <0/1> | If enabled, bots will be completely stationary and not fire any weapons.
Example Screenshot: bot_dummy "1" |
| bot_showcombat | 0 | <0/1> | If enabled, combat messages for bots will be displayed.
Chasecam and botdebug must be enabled as well for this command to work. Example Screenshot: bot_showcombat "1" |
| bot_showlrgoal | 0 | <0/1> | If enabled, the long range goals for bots will be displayed.
Chasecam and botdebug must be enabled as well for this command to work. Example Screenshot: bot_showlrgoal "1" |
| bot_showpath | 0 | <0/1> | If enabled, a path will be drawn that the bot is following.
Chasecam and botdebug must be enabled as well for this command to work. Example Screenshot: bot_showpath "1" |
| bot_showsrgoal | 0 | <0/1> | If enabled, the short range goals for bots will be displayed.
Chasecam and botdebug must be enabled as well for this command to work. Example Screenshot: bot_showsrgoal "1" |
cg_
| Command | Default | Parameters | Description |
|---|---|---|---|
| cg_autoaction_demo | 0 | <0/1> | Enables automatic demo recording of matches after warmup mode is finished.
The demo will be written to /demos/autorecord/ in your data folder with the time, date, map, and your in-game name in the filename. |
| cg_autoaction_screenshot | 0 | <0/1> | Enables automatic screenshot of final standings on the scoreboard when the match is finished.
The screenshot will be written to /screenshots/ in your data folder with the time, date, map, and your in-game name in the filename. |
| cg_autoaction_spectator | 0 | <0/1> | Use autoaction when spectating games. |
| cg_autoaction_stats | 0 | <0/1> | If enabled, your statistics (accuracy, kills, deaths, k/d ratio, etc.) will be saved in a .txt file in your data folder when the match is finished. |
| cg_bloodTrail | 10 | <value> | Changes the density of damage rings rendered when a player is hit.
0 = Disabled Example Screenshot: cg_bloodTrail "10" |
| cg_bloodTrailAlpha | 1.0 | <0-1> | Sets the transparency of damage rings rendered.
0 = 100% Transparent & 1 = 100% Solid |
| cg_cartoonEffects | 7 | ||
| cg_cartoonHitEffect | 0 | <0/1> | If enabled, critical hit effects are displayed for high damage value attacks.
Example Screenshot: cg_cartoonHitEffect "1" |
| cg_chatBeep | 1 | <0/1> | Enables the chat beep sound when someone sends a message. |
| cg_chatFilter | 0 | <0-2> | Filters chat messages.
0 = Display all Messages, 1 = Filters global chat messages, 2 = Filters team chat messages |
| cg_chatFilterTV | 2 | <0-4> | Filters Warfork TV chat messages.
0 = Display all Messages, 1 = Filters global chat messages, 2 = Filters team chat messages, 4 = Filter TV spectator chat messages |
| cg_clientHUD | <HUD name> | Changes your HUD. | |
| cg_colorCorrection | 1 | <0/1> | Enables color correction.
Color Correction works only on maps which have tables for it with supported GPUs. Example Screenshots: cg_colorCorrection "0" · cg_colorCorrection "1" |
| cg_crosshair | 1 | <0-13> | Changes your crosshair style.
0 = No crosshair
|
| cg_crosshair_color | 255 255 255 | <R G B> | Changes the color of your crosshair. |
| cg_crosshair_damage_color | 255 0 0 | <R G B> | Changes the color of your crosshair when you hit an enemy. |
| cg_crosshair_font | Warsow Crosshairs | Changes the font of your crosshair. | |
| cg_crosshair_size | 24 | <size> | Changes the size of your crosshair. |
| cg_crosshair_strong | 0 | <0-13> | Changes your crosshair style for strong ammo. 0 disables it. |
| cg_crosshair_strong_color | 255 255 255 | <R G B> | Changes the color of your crosshair for strong ammo. |
| cg_crosshair_strong_size | 24 | <size> | Changes the size of your crosshair for strong ammo. |
| cg_damage_blend | 1 | <0-1> | This command no longer works and is a placeholder.
It use to enable a red flash when you got hit if cg_damage_indicator = 1. |
| cg_damage_indicator | 1 | <0-1> | If enabled, a red damage indicator will appear in the direction(s) you were hit. |
| cg_damage_indicator_time | 25 | <value> | Sets how long the red damage indicator will be visible. |
| cg_damageNumbers | 1 | <0/1> | Enables Damage Numbers that are displayed when attacking a player. |
| cg_damageNumbersColor | 8 | <0-11> | Changes the color of your Damage Numbers.
0 = White, 1 = Black, 2 = Red, 3 = Green, 4 = Blue, 5 = Yellow, 6 = Orange, 7 = Magenta, 8 = Cyan, 9 = Light Grey, 10 = Medium Grey, 11 = Dark Grey |
| cg_damageNumbersDistance | 48 | <1-200> | The vertical distance above the player model that Damage Numbers are displayed. |
| cg_damageNumbersOffset | 1 | <1-5> | The offset distance between the Damage Number and its shadow. |
| cg_damageNumbersSize | 1 | <1-4> | Changes the size of your Damage Numbers.
1 = Tiny, 2 = Small, 3 = Medium, 4 = Large |
| cg_debugHUD | 0 | <0/1> | If enabled, the HUD name that's being loaded will print to console. |
| cg_debugPlayerModels | 0 | <0/1> | If enabled, player model information will be displayed on each map load in console. |
| cg_debugWeaponModels | 0 | <0/1> | If enabled, weapon model information will be displayed on each map load in console. |
| cg_decals | 1 | <0/1> | If enabled, you will see projectile impact effects on walls. |
| cg_draw2D | 1 | <0/1> | If enabled, you will see the HUD (scores, ammunition, clock, etc.) |
| cg_ebbeam_alpha | 0.4 | <0-1> | Sets the transparency of the Electrobolt Beam. 0 = 100% Transparent & 1 = 100% Solid |
| cg_ebbeam_old | 0 | <0/1> | If enabled, you will see the old (simplistic) Electrobolt beam. |
| cg_ebbeam_time | 0.6 | <value> | Sets how long the Elecrobolt beam will be visible. |
| cg_ebbeam_width | 64 | <value> | Sets the width of the Elecrobolt beam. |
| cg_explosionsDust | 0 | <0/1> | If enabled, an explosion dust will appear around Grenade Launcher and Rocket Launcher projectiles upon impact. |
| cg_explosionsRing | 0 | <0/1> | If enabled, an explosion ring will appear around Grenade Launcher and Rocket Launcher projectiles upon impact. |
| cg_flashWindowCount | 4 | <value> | The amount of times Warfork flashes in your taskbar if warmup ends and a match starts. |
| cg_forceMyTeamAlpha | 0 | <0/1> | If enabled, your HUD, teammates and enemies will appear as if you always were in the Alpha team. |
| cg_gamepad_accelMax | 2 | <value> | Maximum acceleration of the gamepad. |
| cg_gamepad_accelSpeed | 3 | <value> | Speed of gamepad's acceleration. |
| cg_gamepad_accelThres | 0.9 | <value> | Threshold of gamepad's acceleration. |
| cg_gamepad_moveThres | 0.239 | <value> | Specifies the dead-zone for movement. |
| cg_gamepad_pitchInvert | 0 | <0/1> | If enabled, the gamepad will be inverted. |
| cg_gamepad_pitchSpeed | 240 | <value> | Specifies the sensitivity when looking up and down. |
| cg_gamepad_pitchThres | 0.265 | <value> | Specifies the dead-zone for looking up and down. |
| cg_gamepad_runThres | 0.75 | ||
| cg_gamepad_strafeRunThres | 0.45 | ||
| cg_gamepad_strafeThres | 0.239 | ||
| cg_gamepad_swapSticks | 0 | <0/1> | Swaps sticks on your gamepad. |
| cg_gamepad_yawSpeed | 260 | <value> | Specifies the sensitivity when looking left and right. |
| cg_gamepad_yawThres | 0.265 | <value> | Specifies the dead-zone for looking left and right. |
| cg_gibs | 1 | <0/1> | This command is a placeholder.
It use to define the total number of gibs that would be displayed when you fragged someone. |
| cg_gun | 1 | <0/1> | Shows your weapon. |
| cg_gun_alpha | 1 | <0-1> | Transparency of your weapon model. |
| cg_gun_fov | 90 | <1-160> | Field-of-View of your weapon model. |
| cg_gunbob | 1 | <0/1> | Enables bobbing of the weapon model. |
| cg_gunx | 0 | <value> | Moves your weapon's model on the X axis. |
| cg_guny | 0 | <value> | Moves your weapon's model on the Y axis. |
| cg_gunz | 0 | <value> | Moves your weapon's model on the Z axis. |
| cg_handOffset | 5 | <value> | The offset of your hand's position. 0 means middle. |
| cg_instabeam_alpha | 0.4 | <0-1> | Transparency of the instabeam. |
| cg_instabeam_time | 0.4 | <value> | The time an instagun beam will be displayed before disappearing. |
| cg_instabeam_width | 7 | <value> | The width of an instagun beam. |
| cg_laserBeamSubdivisions | 10 | <value> | The higher the number the smoother the laser beam looks. |
| cg_movementStyle | 0 | <0/1> | Old movement = 0 and New movement = 1 |
| cg_noAutoHop | 0 | <0/1> | If enabled, disables autohop by holding spacebar. |
| cg_outlineModels | 1 | <0/1> | Outlines models. |
| cg_outlinePlayers | 1 | <0/1> | Outlines players. |
| cg_outlineWorld | 0 | <0/1> | Outlines every object in maps. |
| cg_particles | 1 | <0/1> | Enables particles. |
| cg_pickup_flash | 0 | <0/1> | If enabled, you will see a flash when picking up an item or weapon.
For this command to work please set cg_showViewBlends 1 |
| cg_placebo | 0 | <value> | An easteregg for comedic purpose that does nothing. It will be removed shortly. |
| cg_playerTrailsColor | 0.0 1.0 0.0 | <R G B> | This command has already been removed from the game and only exists in default.cfg. The next update will purge the remnants. |
| cg_playList | sounds/music/match.m3u | <path> | Path to a music playlist. |
| cg_playListShuffle | 1 | <0/1> | Plays songs randomly from the music playlist. |
| cg_predict | 1 | <0/1> | Predicts players' movement on multiplayer servers for smoothness. |
| cg_predict_optimize | 1 | <0/1> | Optimizes cg_predict's behavior. |
| cg_predictLaserBeam | 1 | <0/1> | If enabled, a perfectly straight line laserbeam will always be drawn regardless of server lag. If disabled, a laserbeam will be drawn based on server lag. |
| cg_projectileAntilagOffset | 1.0 | <value> | The defined value adds a time offset to counter anti-lag visualization. |
| cg_projectileFireTrail | 90 | <value> | Controls the amount of firetrail left behind when firing the Rocket Launcher or Grenade Launcher.
0 = Disabled |
| cg_projectileFireTrailAlpha | 0.45 | <0-1> | Controls the transparency level of the firetrail left behind when firing the Rocket Launcher or Grenade Launcher.
0 = 100% Transparent, 1 = Solid Color |
| cg_projectileTrail | 60 | <value> | Controls the amount of smoke left behind when firing the Rocket Launcher or Grenade Launcher.
0 = Disabled |
| cg_raceGhosts | 0 | <0/1> | Enables ghosts while racing. |
| cg_raceGhostsAlpha | 0.25 | <0-1> | Transparency of race ghosts. |
| cg_scoreboardFontFamily | Droid Sans Mono | Name of font used in scoreboard. | |
| cg_scoreboardFontSize | 12 | <value> | Size of scoreboard's font. |
| cg_scoreboardMonoFontFamily | Droid Sand Mono | ||
| cg_scoreboardStats | 1 | <0-1> | If enabled, Weapons Statistics will be shown on the Scoreboard. |
| cg_scoreboardTitleFontFamily | Hemi Head | Name of font used in the scoreboard's title. | |
| cg_scoreboardTitleFontSize | 24 | <value> | Size of the font used in scoreboard's title. |
| cg_scoreboardWidthScale | 1.0 | <value> | Width scale of the scoreboard. |
| cg_shadows | 1 | <0-2> | Enables shadows. Uses simple shadows if set to 1, shadowmaps if set to 2. 0 to disable. |
| cg_showAwards | 1 | <0/1> | Shows awards upon certain events (On Fire! etc.). |
| cg_showBloodTrail | 1 | <0/1> | If enabled, damage rings will be rendered when a player is hit. |
| cg_showCaptureAreas | 1 | <0/1> | A command that does nothing. It will be removed shortly. |
| cg_showChasers | 1 | <0/1> | Displays chasers on the scoreboard (if there are any). |
| cg_showCrosshairDamage | 1 | <0/1> | Changes the crosshair's color to the damage color if an enemy gets hit. |
| cg_showFPS | 0 | <0/1> | Enables an FPS counter. |
| cg_showhelp | 1 | <0/1> | Displays help text under the timer. |
| cg_showHUD | 1 | <0/1> | Enables HUD. |
| cg_showItemTimers | 3 | <value> | Displays when items will spawn on your HUD (only in spectator mode). |
| cg_showMiniMap | 0 | <0/1> | Displays a minimap (if supported by gamemode). |
| cg_showMiss | 0 | <0/1> | For debugging server events. If enabled, will dump prediction misses to console in x:y format. x = time y = distance error.
Best to use with con_drawnotify 1 for easier viewing. |
| cg_showObituaries | 3 | <value> | Displays who fragged who using which weapon on your HUD. |
| cg_showPickup | 1 | <0/1> | Displays when you pickup an item on your HUD. |
| cg_showPlayerNames | 1 | <0/1> | Displays player names above player models. |
| cg_showPlayerNames_alpha | 0.4 | <0-1> | Transparency of player names. |
| cg_showPlayerNames_barWidth | 8 | <value> | Bar width above your teammates player model, which contains information such as Health and Armor. |
| cg_showPlayerNames_xoffset | 0 | <value> | Move player names by this much on the X axis. |
| cg_showPlayerNames_yoffset | 16 | <value> | Move player names by this much on the Y axis. |
| cg_showPlayerNames_zfar | 824 | <value> | Defines the distance that player names are still drawn over models. |
| cg_showPlayerTrails | 0 | <0/1> | This command has already been removed from the game and only exists in default.cfg. The next update will purge the remnants. |
| cg_showPointedPlayer | 1 | <0/1> | If enabled, when your mouse is pointed over a teammate or enemy their name will be drawn over the player model. |
| cg_showPressedKeys | 0 | <0/1> | If enabled, will show the key presses of players. |
| cg_showSelfShadow | 0 | <0/1> | Enables seeing your own shadow. |
| cg_showSpeed | 1 | <0/1> | Displays the speed of the player.
Example Screenshot: cg_showSpeed "1" |
| cg_showTeamLocations | 1 | <0/1> | If enabled and your HUD supports it, your teammates location will be shown. |
| cg_showTeamMates | 1 | <0/1> | Show teammates indicators. |
| cg_showTimer | 1 | <0/1> | Displays the match's timer. |
| cg_showViewBlends | 1 | <0/1> | If enabled, fullscreen overlays for underwater and pain effects will be displayed.
Example Screenshots: cg_showViewBlends "0" · cg_showViewBlends "1" |
| cg_showZoomEffect | 1 | <0/1> | If enabled, the zoom effect is shown. |
| cg_simpleItems | 0 | <0/1> | Replaces 3D models of pickupable items with simplistic 2D models. |
| cg_simpleItemsSize | 16 | <value> | Changes the size of simplistic item models. |
| cg_specHUD | <undefined> | <HUD name> | Changes the HUD while spectating. |
| cg_strafeHUD | 0 | <0/1> | Enables strafe HUD. |
| cg_teamALPHAcolor | 254 101 101 | <R G B> | Color of team Alpha players. |
| cg_teamALPHAmodel | bigvic | <model name> | Default model of team Alpha players. |
| cg_teamALPHAmodelForce | 1 | <0/1> | Changes models of all team Alpha players to a user-chosen one. |
| cg_teamALPHAskin | default | <default/fullbright> | Changes models skin of all Team Forbidden players to a user-chosen one. |
| cg_teamBETAcolor | 153 204 255 | <R G B> | Color of team Beta players. |
| cg_teamBETAmodel | padpork | <model name> | Default model of team Beta players. |
| cg_teamBETAmodelForce | 1 | <0/1> | Changes models of all team Beta players to a user-chosen one. |
| cg_teamBETAskin | default | <default/fullbright> | Changes models skin of all Team Icy players to a user-chosen one. |
| cg_teamColoredBeams | 0 | <0/1> | If enabled, the LG beam color will be changed to the team color of the attacker.
Example Screenshots: cg_teamColoredBeams "0" · cg_teamColoredBeams "1" |
| cg_teamColoredInstaBeams | 1 | <0/1> | Changes the color of the InstaBeam to the team color of the attacker.
Example Screenshots: cg_teamColoredInstaBeams "0" · cg_teamColoredInstaBeams "1" |
| cg_teamPLAYERScolor | 0 255 70 | <R G B> | Color of team Players players (non-team based gametypes). |
| cg_teamPLAYERScolorForce | 0 | <0/1> | Changes color of all team Players players to a user-chosen one. |
| cg_teamPLAYERSmodel | bigvic | <model name> | Default model of team Players players. |
| cg_teamPLAYERSmodelForce | 0 | <0/1> | Changes models of all team Players players to a user-chosen one. |
| cg_teamPLAYERSskin | default | <default/fullbright> | Changes models skin of all team Players players to a user-chosen one.
Example Screenshots: cg_teamPLAYERSskin "default" · cg_teamPLAYERSskin "fullbright" |
| cg_thirdPerson | 0 | <0/1> | Enables third person view.
Example Screenshots: cg_thirdPerson "0" · cg_thirdPerson "1" |
| cg_thirdPersonAngle | 0 | <value> | Changes the angle of third person view.
Example Screenshots: cg_thirdPersonAngle "0" · cg_thirdPersonAngle "180" |
| cg_thirdPersonRange | 70 | <value> | The distance that the player model appears from the camera when in third person view.
Example Screenshots: cg_thirdPersonRange "70" · cg_thirdPersonRange "200" |
| cg_touch_flip | 0 | ||
| cg_touch_lookDecel | 8.5 | ||
| cg_touch_lookInvert | 0 | ||
| cg_touch_lookSens | 9 | ||
| cg_touch_lookThres | 5 | ||
| cg_touch_moveThres | 24 | ||
| cg_touch_scale | 100 | ||
| cg_touch_showMoveDir | 1 | ||
| cg_touch_strafeThres | 32 | ||
| cg_touch_zoomThres | 24 | ||
| cg_touch_zoomTime | 250 | ||
| cg_viewBob | 1 | <0/1> | Enabled head bobbing. |
| cg_viewSize | 100 | <40-100> | The percentage of the viewable area displayed on your screen.
If less than 100 is defined then black space will fill your screen. If you set cl_demoavi_scissor 0 then images will always be exported as cg_viewSize 100. If you set cl_demoavi_scissor 1 then images will always be exported as cg_viewSize 100. Example Screenshot: cg_viewsize "40" |
| cg_voiceChats | 1 | <0/1> | Enables voice commands (also known as "VSAYS"). |
| cg_volume_announcer | 1.0 | <0-2.0> | Changes the volume of the announcer. |
| cg_volume_effects | 1.0 | <0-2.0> | Changes the volume of the effects. |
| cg_volume_hitsound | 1.0 | <0-2.0> | Changes the volume of the hitsound. |
| cg_volume_players | 1.0 | <0-2.0> | Changes the volume of player sounds. |
| cg_volume_voicechats | 1.0 | <0.0-2.0> | Changes the volume of voice commands. |
| cg_weaponAutoswitch | 2 | <0-2> | Enables auto switching of weapons when you're out of ammo.
0 = Autoswitch Disabled, 1 = Autoswitch Enabled (one click), 2 = Autoswitch Enabled (two clicks) |
| cg_weaponFlashes | 2 | <0-2> | Enables weapon flashes.
0 = All Weapon Flashes Disabled, 1 = Wall + Floor Weapons Flash Enabled, 2 = Wall + Floor & Weapon Muzzle Flashes Enabled (if cg_gun is set to 1). |
| cg_weaponlist | 1 | <0/1> | If enabled, the weapon list will be displayed on your HUD. |
cl_
| Command | Default | Parameters | Description |
|---|---|---|---|
| cl_anglespeedkey | 1.5 | <value> | Defines the multiplier for how fast you turn when running is toggled. |
| cl_checkForUpdate | 1 | <0/1> | If enabled, the client will be permitted to check for updates. |
| cl_compresspackets | 1 | <0/1> | Compresses network packets. |
| cl_debug_serverCmd | 0 | <0/1> | If enabled, server debug information will printed to console. |
| cl_debug_timeDelta | 0 | <0/1> | If enabled, server debug information (netcode) will printed to console. |
| cl_demoavi_audio | 0 | If set to 1 Warfork will create a .wav when using demoavi cl_demoavi_video should be set to 0 since it will lag the game when capturing resulting in audio that is not realtime. | |
| cl_demoavi_fps | 30.3 | Determines how many frames per second get captured by demoavi | |
| cl_demoavi_scissor | 0 | ||
| cl_demoavi_video | 1 | <0/1> | If set to 1 Warfork will output frames when using demoavi |
| cl_download_allow_modules | 1 | <0/1> | Allows the downlaoding of modules.
This is needed for mods such as Racemod. |
| cl_download_name | <value> | *write protected* | The name of what's being downloaded. |
| cl_download_percent | 0 | *write protected* | The percentage of what's being downloaded. |
| cl_downloads | 1 | <0/1> | If enabled, your client is allowed to download files (maps, textures, etc.) directly from the server you're connecting to. |
| cl_downloads_from_web | 1 | *write protected* | If enabled, your client is allowed to download files (maps, textures, etc.) from a webserver. |
| cl_downloads_from_web_timeout | 600 | <value> | The time before a client timeout when attempting to download from a webserver. |
| cl_extrapolate | 1 | ||
| cl_flip | 0 | ||
| cl_maxfps | 250 | <24-1000> | Sets the FPS limit. |
| cl_mm_autologin | 1 | <0/1> | If enabled, matchmaking will automatically be logged into. |
| cl_mm_session | 0 | *write protected* | Contains your matchmaking session information. |
| cl_mm_user | <undefined> | <value> | Contains your matchmaking username. |
| cl_mumble | 0 | <0/1> | Enables positional audio support for Mumble |
| cl_mumble_scale | 0.0254 | <value> | Scales the positional audio distance for Mumble. |
| cl_pitchspeed | 150 | <value> | The speed the player's screen moves up and down when using keyboard keys. |
| cl_port | 0 | *write protected* | IPv4 client port |
| cl_port6 | 0 | *write protected* | IPv6 client port |
| cl_pps | 40 | <value> | The amount packets per second that client is sending to the server. |
| cl_run | 1 | <0/1> | If enabled, running will be toggle automatically.
This serves no purpose in disabling as Warfork has no footstep sounds. |
| cl_shownet | 0 | <0/1> | If enabled, latency information for network packets will be printed in console. |
| cl_sleep | 0 | <0/1> | If enabled, you will get lower CPU usage with the cost of higher mouse latency and less stable fps. |
| cl_stereo | 0 | <0/1> | If enabled, stereoscopic rendering mode will be toggled. |
| cl_stereo_separation | 0.4 | <0-1.0> | Camera offset with cl_stereo |
| cl_timeout | 120 | <value> | Kicks the player if connection is lost for more than x seconds. |
| cl_ucmdMaxResend | 3 | ||
| cl_yawspeed | 140 |
cm_
| Command | Default | Parameters | Description |
|---|---|---|---|
| cm_mapHeader | <undefined> | <value> | Stores map header information in the cvar. |
| cm_mapVersion | <undefined> | <value> | Stores map format description (IBSP, FBSP, etc.) in the cvar. |
| cm_noAreas | 0 | <0/1> | Disables area culling. |
| cm_noCurves | 0 | <0/1> | If enabled, you can clip through curved surfaces.
Example Screenshots: cm_noCurves "1" Perspective 1 · cm_noCurves "1" Perspective 2 |
com_
| Command | Default | Parameters | Description |
|---|---|---|---|
| com_introPlayed3 | 1 | ||
| com_showtrace | 0 |
con_
| Command | Default | Parameters | Description |
|---|---|---|---|
| con_chatmode | 3 | ||
| con_drawNotify | 0 | ||
| con_fontSystemBigSize | 24 | <value> | |
| con_fontSystemConsoleSize | 14 | <value> | |
| con_fontSystemFallbackFamily | Droid Sans Fallback | ||
| con_fontSystemFamily | Droid Sans | ||
| con_fontSystemMediumSize | 16 | <value> | |
| con_fontSystemMonoFamily | Droid Sans Mono | ||
| con_fontSystemSmallSize | 14 | <value> | |
| con_fontSystemTinySize | 8 | <value> | |
| con_messageMode | 0 | ||
| con_notifytime | 3 | ||
| con_printText | 1 |
fs_
| Command | Default | Parameters | Description |
|---|---|---|---|
| fs_basegame | basewf | *write protected* | |
| fs_basepath | . | *write protected* | |
| fs_cdpath | *write protected* | ||
| fs_game | basewf | ||
| fs_usedownloadsdir | 1 | *write protected* | |
| fs_usehomedir | 1 | *write protected* |
g_
| Command | Default | Parameters | Description |
|---|---|---|---|
| g_allow_bunny | 1 | *write protected* | |
| g_allow_falldamage | 1 | <0/1> | Enables fall damage. |
| g_allow_selfdamage | 1 | <0/1> | If enabled, players can hurt themselves with own weapons. |
| g_allow_spectator_voting | 1 | <0/1> | Allows spectators to vote. Affects callvotes. |
| g_allow_stun | 1 | <0/1> | If enabled, players can get stunned. |
| g_allow_teamdamage | 1 | <0/1> | Enables friendlyfire. |
| g_ammo_respawn | 0 | <value> | Changes the ammo respawn time. |
| g_antilag | 1 | <0/1> | Enables antilag. |
| g_antilag_maxtimedelta | 200 | <value> | |
| g_antilag_timenudge | 0 | ||
| g_asGC_interval | 10 | ||
| g_asGC_stats | 0 | ||
| g_autorecord | 0 | <0/1> | Automatically records all demos. |
| g_autorecord_maxdemos | 0 | <value> | Maximum amount of automatically recorded demos to keep (deletes old ones once limit is exceeded). |
| g_bomb_armtime | 4 | <value> | (Bomb-exclusive) Changes the amount of time needed to arm a bomb.. |
| g_bomb_bombtimer | 25 | <value> | (Bomb-exclusive) Time before the bomb explodes after arming. |
| g_bomb_carriers | 1 | <value> | (Bomb-exclusive) |
| g_bomb_defusetime | 7 | <value> | (Bomb-exclusive) Changes the amount of time needed to defuse an armed bomb. |
| g_bomb_roundtime | 60 | <value> | (Bomb-exclusive) Sets the round time (in seconds). |
| g_bomb_spawnprotection | 3 | <value> | (Bomb-exclusive) |
| g_challengers_queue | 1 | <0/1> | Enables the challengers queue. |
| g_countdown_time | 5 | <value> | |
| g_disable_vote_allow_falldamage | 0 | <0/1> | Disables "allow_falldamage" callvote. Doesn't affect opcalls. |
| g_disable_vote_allow_selfdamage | 0 | <0/1> | Disables "allow_selfdamage" callvote. Doesn't affect opcalls. |
| g_disable_vote_allow_teamdamage | 0 | <0/1> | Disables "allow_teamdamage" callvote. Doesn't affect opcalls. |
| g_disable_vote_allow_uneven | 0 | <0/1> | Disables "allow_uneven" callvote. Doesn't affect opcalls. |
| g_disable_vote_allready | 0 | <0/1> | Disables "allready" callvote. Doesn't affect opcalls. |
| g_disable_vote_extended_time | 0 | <0/1> | Disables "extended_time" callvote. Doesn't affect opcalls. |
| g_disable_vote_gametype | 0 | <0/1> | Disables "gametype" callvote. Doesn't affect opcalls. |
| g_disable_vote_instajump | 0 | <0/1> | Disables "instajump" callvote. Doesn't affect opcalls. |
| g_disable_vote_instashield | 0 | <0/1> | Disables "instashield" callvote. Doesn't affect opcalls. |
| g_disable_vote_kick | 0 | <0/1> | Disables "kick" callvote. Doesn't affect opcalls. |
| g_disable_vote_kickban | 0 | <0/1> | Disables "kickban" callvote. Doesn't affect opcalls. |
| g_disable_vote_lock | 0 | <0/1> | Disables "lock" callvote. Doesn't affect opcalls. |
| g_disable_vote_map | 0 | <0/1> | Disables "map" callvote. Doesn't affect opcalls. |
| g_disable_vote_maxteamplayers | 0 | <0/1> | Disables "maxteamplayers" callvote. Doesn't affect opcalls. |
| g_disable_vote_mute | 0 | <0/1> | Disables "mute" callvote. Doesn't affect opcalls. |
| g_disable_vote_nextmap | 0 | <0/1> | Disables "nextmap" callvote. Doesn't affect opcalls. |
| g_disable_vote_numbots | 0 | <0/1> | Disables "numbots" callvote. Doesn't affect opcalls. |
| g_disable_vote_rebalance | 0 | <0/1> | Disables "rebalance" callvote. Doesn't affect opcalls. |
| g_disable_vote_remove | 0 | <0/1> | Disables "remove" callvote. Doesn't affect opcalls. |
| g_disable_vote_restart | 0 | <0/1> | Disables "restart" callvote. Doesn't affect opcalls. |
| g_disable_vote_scorelimit | 0 | <0/1> | Disables "scorelimit" callvote. Doesn't affect opcalls. |
| g_disable_vote_shuffle | 0 | <0/1> | Disables "shuffle" callvote. Doesn't affect opcalls. |
| g_disable_vote_timein | 0 | <0/1> | Disables "timein" callvote. Doesn't affect opcalls. |
| g_disable_vote_timelimit | 0 | <0/1> | Disables "timelimit" callvote. Doesn't affect opcalls. |
| g_disable_vote_timeout | 0 | <0/1> | Disables "timeout" callvote. Doesn't affect opcalls. |
| g_disable_vote_unlock | 0 | <0/1> | Disables "unlock" callvote. Doesn't affect opcalls. |
| g_disable_vote_unmute | 0 | <0/1> | Disables "unmute" callvote. Doesn't affect opcalls. |
| g_disable_vote_vmute | 0 | <0/1> | Disables "vmute" callvote. Doesn't affect opcalls. |
| g_disable_vote_vunmute | 0 | <0/1> | Disables "vunmute" callvote. Doesn't affect opcalls. |
| g_disable_vote_warmup_timelimit | 0 | <0/1> | Disables "warmup_timelimit" callvote. Doesn't affect opcalls. |
| g_enforce_map_pool | 0 | <0/1> | Enables enforcing the map pool for "map" callvote. |
| g_floodprotection_delay | 10 | <value> | Blocks the chat for x seconds to player who triggered the flood protection. |
| g_floodprotection_messages | 4 | <value> | How many messages can a player send in y seconds before triggering the flood protection. |
| g_floodprotection_seconds | 4 | <value> | Triggers flood protection if a player sends more than x messages in y seconds. |
| g_floodprotection_team | 0 | <0/1> | If enabled, protects teamchat from flood. |
| g_gametype | dm | <gametype> | Changes the gametype. Requires server restart / map reload. |
| g_gametypes_available | *write protected* | ||
| g_gametypes_list | *write protected* | ||
| g_gravity | 850 | <value> | Obsolete ConVar. |
| g_health_respawn | 0 | ||
| g_inactivity_maxtime | 90.0 | <value> | A player will get moved to spectators team if inactive for longer than x seconds (doesn't affect warmup). |
| g_instagib | 0 | <0/1> | Enables InstaGib. Requires server restart. |
| g_instajump | 1 | <0/1> | Enables InstaJump. |
| g_instashield | 1 | <0/1> | Enables InstaShield. |
| g_knockback_scale | 1.0 | <value> | Changes the knockback scale of weapons. Affects normal weapons AND InstaGib. |
| g_map_pool | <maplist> | Only allows these maps to appear in "map" callvote. Needs g_enforce_map_pool set to 1. | |
| g_maplist | <maplist> | Sets the server's map list. | |
| g_maprotation | 1 | <0-2> | Sets map rotation mode. 0 - same map, 1 - in order, 2 - random. |
| g_match_extendedtime | 2 | <value> | Changes the overtime's length to x minutes. 0 to disable. |
| g_match_score | *write protected* | ||
| g_match_time | *write protected* | ||
| g_maxtimeouts | 2 | <value> | How many timeouts can be called per match. |
| g_maxvelocity | 16000 | <value> | Obsolete ConVar. |
| g_needpass | 1 | *write protected* | |
| g_numbots | 0 | <value> | Amount of bots on the server. |
| g_operator_password | <password> | Sets the operator password. Operator is disabled if empty. | |
| g_postmatch_timelimit | 4 | <value> | |
| g_race_gametype | 0 | *write protected* | |
| g_scorelimit | 0 | <value> | Amount of points required to obtain by a player / team to end the match. |
| g_spawnsystem_wave_maxcount | 16 | <value> | |
| g_spawnsystem_wave_time | 15 | <value> | |
| g_teams_allow_uneven | 1 | <0/1> | Allow the teams to be uneven. If enabled, allows players to switch teams anytime. |
| g_teams_maxplayers | 0 | <value> | How many players can a single team have. |
| g_timelimit | 10 | <value> | Sets the duration of matches (in minutes). |
| g_uploads_demos | 1 | <0/1> | Allows players to download demos from the server. |
| g_votable_gametypes | <gametypes> | A list of gametypes allowed to be used in "gametype" callvote. | |
| g_vote_allowed | 1 | <0/1> | Allows / disallows calling ALL votes (including opcalls). |
| g_vote_cooldowntime | 5 | <value> | A player needs to wait x seconds after calling a vote to call another one. |
| g_vote_electtime | 20 | <value> | Specifies how long do callvotes last (in seconds). |
| g_vote_maxchanges | 3 | <value> | Specifies how many times can a player change their vote. |
| g_vote_percent | 55 | <0-100> | How much % of players need to vote yes for the vote to pass. |
| g_warmup_timelimit | 5 | <value> | Sets how long do warmups take (in minutes). |
| g_weapon_respawn | 0 |
gl_
| Command | Default | Parameters | Description |
|---|---|---|---|
| gl_cull | 1 | <0/1> | Enable OpenGL Culling. |
| gl_drawbuffer | GL_BACK | <value> | Specifies the buffer which display information will be written to. |
| gl_driver_win | opengl32.dll | <value> | Specifies the OpenGL driver dll file. |
| gl_ext_bgra | 1 | *write protected* | If enabled, the BGRA openGL extension will be used if supported. |
| gl_ext_blend_func_separate | 1 | *write protected* | |
| gl_ext_compressed_ETC1_RGB8_texture | 1 | ||
| gl_ext_depth24 | 1 | ||
| gl_ext_depth_nonlinear | 1 | ||
| gl_ext_depth_texture | 1 | ||
| gl_ext_draw_instanced | 1 | ||
| gl_ext_draw_range_elements | 1 | <0/1> | If enabled, DrawRangeElements (an opengl extension) will be used if it's supported. |
| gl_ext_ES3_compatibility | 1 | ||
| gl_ext_fragment_precision_high | 1 | ||
| gl_ext_fragment_shader | 1 | *write protected* | |
| gl_ext_framebuffer_blit | 1 | ||
| gl_ext_framebuffer_object | 1 | *write protected* | |
| gl_ext_gamma_control | 1 | ||
| gl_ext_get_program_binary | 1 | ||
| gl_ext_GLSL | 1 | *write protected* | |
| gl_ext_GLSL130 | 1 | ||
| gl_ext_GLSL_core | 1 | *write protected* | |
| gl_ext_gpu_memory_info | 1 | *write protected* | |
| gl_ext_gpu_shader5 | 1 | ||
| gl_ext_half_float_vertex | 1 | ||
| gl_ext_instanced_arrays | 1 | ||
| gl_ext_meminfo | 1 | *write protected* | |
| gl_ext_multitexture | 1 | *write protected* | |
| gl_ext_packed_depth_stencil | 1 | ||
| gl_ext_rgb8_rgba8 | 1 | ||
| gl_ext_shader_objects | 1 | *write protected* | |
| gl_ext_shading_language_100 | 1 | *write protected* | |
| gl_ext_shading_language_130 | 1 | ||
| gl_ext_shadow | 1 | ||
| gl_ext_shadow_samplers | 1 | ||
| gl_ext_swap_control | 1 | *write protected* | |
| gl_ext_texture3D | 1 | <0/1> | If enabled, the Texture3D (an opengl extension) will be used if it's supported. |
| gl_ext_texture_array | 1 | ||
| gl_ext_texture_compression | 1 | ||
| gl_ext_texture_cube_map | 1 | *write protected* | If enabled, Texture Cube Mapping (an opengl extension) will be used if it's supported. |
| gl_ext_texture_edge_clamp | 1 | *write protected* | |
| gl_ext_texture_filter_anisotropic | 1 | *write protected* | |
| gl_ext_texture_lod | 1 | ||
| gl_ext_texture_non_power_of_two | 1 | ||
| gl_ext_texture_npot | 1 | ||
| gl_ext_vertex_buffer_object | 1 | *write protected* | If enabled, opengl vertex buffer objects will be utilized if supported.
Vertex buffer objects are often slower than range elements. |
| gl_ext_vertex_buffer_object_hack | 0 | *write protected* | |
| gl_ext_vertex_half_float | 1 | ||
| gl_ext_vertex_shader | 1 | *write protected* | |
| gl_finish | 0 | <0/1> | If enabled, the CPU will wait for the GPU at the end of each rendered frame.
This can help resolve some video lag and input issues. |
| gl_max_texture_size | 0 | *write protected* |
http_
| Command | Default | Parameters | Description |
|---|---|---|---|
| http_proxy | |||
| http_proxyuserpwd |
in_
| Command | Default | Parameters | Description |
|---|---|---|---|
| in_debug | 0 | ||
| in_dinput | 1 | ||
| in_grabinconsole | 0 | ||
| in_initmouse | 1 | *write protected* | |
| in_mouse | 1 | <0/1> | Enables mouse input |
| in_restart |
irc_
| Command | Default | Parameters | Description |
|---|---|---|---|
| irc_nick | WarforkPlayer | <value> | Sets your nickname. |
| irc_password | <undefined> | <value> | Specifies a password for IRC Servers which require one to connect. |
| irc_port | 6667 | <value> | Specifies a port for the IRC Server you're connecting to. |
| irc_server | irc.quakenet.org | <value> | Specifies a ip\hostname for the IRC Server you're connecting to. |
| irc_user | WarforkUser | <value> | Specifies a username for IRC Servers which require one to connect. |
logconsole_
| Command | Default | Parameters | Description |
|---|---|---|---|
| logconsole | |||
| logconsole_append | 1 | ||
| logconsole_flush | 0 | ||
| logconsole_timestamp | 0 |
m_
| Command | Default | Parameters | Description |
|---|---|---|---|
| m_accel | 0 | <0/1> | Enables mouse acceleration. |
| m_accelOffset | 0 | ||
| m_accelPow | 2 | ||
| m_accelStyle | 0 | <value> | Style of mouse acceleration. |
| m_filter | 0 | ||
| m_filterStrength | 0.5 | ||
| m_forward | 1 | <value> | Changes your mouse sensitivity when moving forward and back. |
| m_pitch | |||
| m_raw | 1 | <0/1> | Enables raw mouse data input. |
| m_sensCap | 0 | ||
| m_side | 1 | <value> | Changes your mouse sensitivity when moving left and right. |
| m_yaw | 0.022 | <value> | Changes speed scale of X axis. |
r_
| Command | Default | Parameters | Description |
|---|---|---|---|
| r_brightness | 0 | <0-1.0> | Sets the brightness level on your screen. |
| r_coronascale | 0.4 | ||
| r_detailtextures | 1 | <0/1> | If enabled, detailed textures will be shown. |
| r_drawelements | 1 | <0/1> | Enables drawing elements. |
| r_drawentities | 1 | <0/1> | Enables drawing entities. |
| r_drawflat | 0 | <0/1> | If enabled, will draw the floor and walls as solid colors. |
| r_draworder | 0 | ||
| r_drawworld | 1 | <0/1> | Enables drawing the world. |
| r_dynamiclight | 1 | <0/1> | Enables dynamic light. |
| r_environment_color | 0 0 0 | Changes the background color if r_drawworld is 0 | |
| r_faceplanecull | 1 | <0/1> | If enabled, only the polygons of the face will be rendered.
This command doesn't work and exists only in default.cfg. It will be purged and moved into the deprecated commands section soon. |
| r_fastsky | 0 | <0/1> | If enabled, only a basic skybox will be drawn. |
| r_floorcolor | 255 153 0 | <R G B> | The color of floor if r_drawflat = 1. |
| r_fullbright | 0 | <0/1> | Sets maximum brightness to all textures. |
| r_fxaa | 1 | <0/1> | Enables FXAA antialiasing. |
| r_gamma | 1.0 | <value> | Changes the gamma. |
| r_ignorehwgamma | 0 | ||
| r_leafvis | 0 | ||
| r_lerpmodels | 1 | ||
| r_lighting_ambientscale | 1 | ||
| r_lighting_deluxemapping | 1 | ||
| r_lighting_directedscale | 1 | ||
| r_lighting_glossexponent | 24 | ||
| r_lighting_glossintensity | 1.5 | ||
| r_lighting_grayscale | 0 | <0/1> | Enables grayscale lighting. |
| r_lighting_maxglsldlights | 16 | ||
| r_lighting_maxlmblocksize | 2048 | ||
| r_lighting_packlightmaps | 1 | ||
| r_lighting_specular | 1 | ||
| r_lighting_vertexlight | 0 | ||
| r_lightmap | 0 | <0/1> | If enabled, all textures will not be displayed and only static lights will be visible. |
| r_lockpvs | 0 | ||
| r_lodbias | 0 | ||
| r_lodscale | 5.0 | ||
| r_mapoverbrightbits | 2 | ||
| r_maxfps | 250 | <24-1000> | Sets the FPS limit. |
| r_maxglslbones | 100 | ||
| r_multithreading | 1 | <0/1> | Enables multithreading. |
| r_nobind | 0 | ||
| r_nocull | 0 | ||
| r_norefresh | 0 | ||
| r_novis | 0 | ||
| r_offsetmapping | 2 | ||
| r_offsetmapping_reliefmapping | 0 | ||
| r_offsetmapping_scale | 0.02 | ||
| r_outlines_cutoff | 712 | ||
| r_outlines_scale | 1 | ||
| r_outlines_world | 1.8 | ||
| r_overbrightbits | 0 | ||
| r_packlightmaps | 1 | ||
| r_picmip | 0 | <0-16> | Overall image and texture quality. The highest the number the lower the quality level. |
| r_polyblend | 1 | ||
| r_portalmaps | 1 | ||
| r_portalmaps_maxtexsize | 1024 | ||
| r_portalonly | 0 | ||
| r_screenshot_fmtstr | wf_y%m%d_HM%S | <date format> | File name format of screenshots. |
| r_screenshot_jpeg | 1 | <0/1> | Enables .jpeg screenshots. |
| r_screenshot_jpeg_quality | 90 | <0-100> | Sets the quality of jpeg screenshots, in percentages. |
| r_shadows | 0 | ||
| r_shadows_alpha | 0.7 | <0-1> | Alpha of shadows. |
| r_shadows_dither | 0 | ||
| r_shadows_maxtexsize | 64 | ||
| r_shadows_nudge | 1 | ||
| r_shadows_pcf | 1 | ||
| r_shadows_projection_distance | 64 | ||
| r_shadows_self_shadow | 0 | ||
| r_shownormals | 0 | ||
| r_showtris | 0 | ||
| r_skymip | 0 | <0-16> | Overall image and texture quality of the skybox. The highest the number the lower the quality level. |
| r_soft_particles | 1 | <0/1> | Enables soft particles. |
| r_soft_particles_available | 0 | *write protected* | |
| r_soft_particles_scale | 0.02 | Scale of soft particles. | |
| r_speeds | 0 | ||
| r_stencilbits | 0 | ||
| r_subdivisions | 5 | ||
| r_swapinterval | 0 | ||
| r_swapinterval_min | 0 | *write protected* | |
| r_temp1 | 0 | ||
| r_texturebits | 0 | <0/1> | If enabled, vsync will be activated.
Set vid_displayfrequency to your preferred value. |
| r_texturecompression | 0 | <0/1> | Enables texture compression. |
| r_texturefilter | 4 | ||
| r_texturefilter_max | 0 | *write protected* | |
| r_texturemode | GL_LINEAR_MIPMAP_LINEAR | ||
| r_usenotexture | 0 | <0/1> | Disables textures. |
| r_wallcolor | 255 255 255 | <R G B> | The color of walls if r_drawflat = 1. |
rcon_
| Command | Default | Parameters | Description |
|---|---|---|---|
| rcon_address | <undefined> | <ip address> | Sets the IP address for rcon connection. |
| rcon_password | <undefined> | <password> | Sets the password for rcon connection. |
s_
| Command | Default | Parameters | Description |
|---|---|---|---|
| s_doppler | 1.0 | <value> | If enabled, Doppler effect will be used for sounds |
| s_globalfocus | 0 | <0/1> | Mutes the game when alt-tabbed.
0 = Disabled, 1 = Enabled |
| s_khz | 44 | <value> | The sampling rate of the sounds in kilohertz. |
| s_mixahead | 0.14 | <value> | The specified time waited before mixing sound samples. |
| s_module | 1 | <0-2> | Specifies the default sound module.
0 = No Sound, 1 = Qfusion, 2 = OpenAL |
| s_module_fallback | 2 | <0-2> | Specifies a fallback sound module incase s_module cannot be loaded. |
| s_musicvolume | 0.15 | <0-1> | Global music volume. |
| s_openAL_device | Generic Software | <value> | Specifies the OpenAL device.
Example: s_openAL_device "Rapture3D" |
| s_pseudoAcoustics | 0 | <0/1> | High quality spatialisation for the Qfusion Sound Module. |
| s_separationDelay | 1.0 | ||
| s_stereo2mono | 0 | <0/1> | Enables mono sound. |
| s_swapstereo | 0 | <0/1> | Swap the left and right sound channel. |
| s_volume | 0.8 | <0-1> | Global volume of the game. |
| s_wavonly | 0 | <0/1> | If enabled, only .wav sound files will be played. |
scr_
| Command | Default | Parameters | Description |
|---|---|---|---|
| scr_consize | 0.4 | <0.1-1.0> | size of the console "0.1-1.0"
0.1 = Smallest size, 0.5 = 50% of the screen, 1.0 = 100% of the screen. |
| scr_conspeed | 3 | <value> | Controls the console drop-down speed.
0 = Instant, 1 = Slowest, and anything higher than 1 increases the speed. |
sv_
| Command | Default | Parameters | Description |
|---|---|---|---|
| sv_autoUpdate | 0 | *write protected* | |
| sv_botpersonality | 0 | ||
| sv_cheats | 0 | <0/1> | Enables cheats on the server. |
| sv_debug_serverCmd | 0 | ||
| sv_defaultmap | wfdm1 | <map> | Changes the default map of the server. |
| sv_demodir | *write protected* | ||
| sv_enforcetime | 1 | ||
| sv_fps | 62 | *write protected* | |
| sv_highchars | 1 | ||
| sv_hostname | <name> | Name of the server. Appears in the server list. | |
| sv_http | 1 | <0/1> | Enables an HTTP server that lets connecting players download missing files. |
| sv_http_ip | <ip address> | If set, binds the HTTP server to a specific IPv4 address. | |
| sv_http_ipv6 | <ip address> | If set, binds the HTTP server to a specific IPv6 address. | |
| sv_http_port | 44444 | <port> | Changes the port of the HTTP server. |
| sv_http_upstream_baseurl | |||
| sv_http_upstream_ip | |||
| sv_http_upstream_realip_header | |||
| sv_ip | <ip address> | If set, binds the Warfork server to a specific IPv4 address. | |
| sv_ip6 | :: | <ip address> | If set, binds the Warfork server to a specific IPv6 address. |
| sv_iplimit | 3 | <value> | Maximum amount of connections from a single IP address. |
| sv_lastAutoUpdate | 0 | *write protected* | |
| sv_maxclients | <value> | Maximum amount of players allowed on the server. | |
| sv_maxentities | 1024 | <value> | Maximum amount of entities on the map. |
| sv_maxmvclients | 4 | ||
| sv_mm_authkey | |||
| sv_mm_debug_reportbots | 0 | ||
| sv_mm_enable | 0 | *write protected* | |
| sv_mm_loginonly | 0 | ||
| sv_modmanifest | *write protected* | ||
| sv_MOTD | 0 | <0/1> | Enables Message Of The Day on the server. |
| sv_MOTDFile | <undefined> | <path> | Path to Message Of The Day file. |
| sv_MOTDString | <undefined> | <value> | A definable MOTD String that takes precedence over sv_MOTDFile.
MOTD String only updates after a map change. |
| sv_port | 44400 | <port> | Changes the IPv4 port of the Warfork server. |
| sv_port6 | 44400 | <port> | Changes the IPv6 port of the Warfork server. |
| sv_pps | 20 | <value> | Packets per second a server sends to the client. |
| sv_public | <0/1> | If set to 1, the server will appear on the public server list. | |
| sv_pure | 0 | <0/1> | If set to 1, the server will check the validity of client files with server. Kicks if invalid. |
| sv_pure_forcemodulepk3 | |||
| sv_reconnectlimit | 3 | <value> | Seconds a client must wait until they can reconnect with a server. |
| sv_showChallenge | 0 | ||
| sv_showclamp | 0 | ||
| sv_showInfoQueries | 0 | ||
| sv_showRcon | 1 | ||
| sv_skilllevel | 2 | ||
| sv_skillRating | 0 | *write protected* | |
| sv_timeout | 125 | ||
| sv_uploads | 1 | ||
| sv_uploads_baseurl | |||
| sv_uploads_demos | 1 | ||
| sv_uploads_demos_baseurl | |||
| sv_uploads_from_server | 1 | <0/1> | If enabled, uploading is allowed directly from the server. |
| sv_uploads_http | 1 | *write protected* | |
| sv_zombietime | 2 | <value> | Determines how long a connected client remains open after it has either timed out with sv_timeout or disconnected. |
ui_
| Command | Default | Parameters | Description |
|---|---|---|---|
| ui_autobrowse_manual | 0 | <0/1> | If enabled, servers will be suggested when you click "Play" and query the masterservers. |
| ui_basepath | ui/porkui | <value> | Defines the basepath of the user interface. |
| ui_cachepurgedate | <undefined> | <yyyy-mm-dd> | Purges the folder "cache/ui" on a specific date, which contains cache from asyncrhonous HTTP requests.
Example: 2020-02-13 |
| ui_lighting | 2 | ||
| ui_preload | 1 | ||
| ui_serverbrowser_tab | |||
| ui_startservercmd | |||
| ui_tutorial_launch | 0 | ||
| ui_tutorial_taken | 0 | <0/1> | If enabled, you will be prompted (once per game load) to complete the tutorial upon clicking "Play". |
| ui_video_profile | medium |
vid_
| Command | Default | Parameters | Description |
|---|---|---|---|
| vid_displayfrequency | 0 | <value> | Defines the refresh rate of your screen in Hz.
0 = Desktop Default |
| vid_fullscreen | 1 | <0/1> | If enabled, Warfork will run in full screen mode. |
| vid_height | 0 | <value> | Defines a custom screen resolution height.
0 = Desktop Default |
| vid_multiscreen_head | -1 | ||
| vid_parentwid | 0 | *write protected* | Defines the parent window identifier. |
| vid_ref | ref_gl | <value> | Defines the video renderer driver. |
| vid_width | 0 | <value> | Defines a custom screen resolution width.
0 = Desktop Default |
| vid_xpos | 0 | <value> | Defines the X position of the game running in window mode. |
| vid_ypos | 0 | <value> | Defines the Y position of the game running in window mode. |
win_
| Command | Default | Parameters | Description |
|---|---|---|---|
| win_noalttab | 0 | <0/1> | If enabled, ALT+TAB will work.
0 = Disabled - 1 Enabled |
| win_nowinkeys | 1 | <0/1> | If enabled, Windows keys will work.
0 = Disabled - 1 Enabled |
Prefixless cvars & cvars with unique prefixes
| Command | Default | Parameters | Description |
|---|---|---|---|
| clan | <name> | Sets the name of your clan. Appears on the scoreboard. | |
| color | 255 255 255 | <R G B> | Sets your Player color. |
| debuggraph | 0 | <0/1> | If enabled, the debug graph will be displayed. |
| dedicated | 0 | *write protected* | Tells the game if it's a dedicated server. |
| developer | 0 | Level of developer information printed to the console. The higher the number, the more information is printed. | |
| developerMemory | 0 | <0/1> | Prints memory allocation information to console if developer is enabled as well. |
| favorites | 0 | ||
| filterban | 1 | ||
| fixedtime | 0 | ||
| fov | 100 | <value> | Changes your Field of view. |
| gamedate | Oct 8 2019 | ||
| gamename | Warfork | *write protected* | Name of the game. |
| graphheight | 32 | Changes the graph height for timegraph, netgraph, etc. | |
| graphscale | 1 | Scales the graph (timegraph, netgraph, etc.) for resolutions with a width greather than 1024. | |
| graphshift | 0 | ||
| hand | 0 | <0/1> | Changes weapon handedness.
0 = right, 1 = left |
| handicap | 0 | <value> | Decreases your damage output by x% usefull for dueling players below your skill level |
| host_speeds | 0 | <0/1> | If enabled timing information will be printed to console.
all (total time), sv (server time), gm (game time), cl (client time), and rf (renderer time). |
| lang | <language> | Sets the language of Warfork. | |
| lookspring | 0 | <0/1> | If enabled, the screen will be automatically centered when using +mlook. |
| lookstrafe | 0 | <0/1> | If enabled, automatic strafing will be toggled when using +mlook. |
| mapname | *write protected* | The name of current map played. | |
| masterservers | master1.forbidden.gg master1.icy.gg | <value> | Specifies the master servers used to query a list of Warfork servers. |
| masterservers_steam | <undefined> | <value> | Specifies the Steam master servers used to query a list of Warfork servers. |
| mm_url | https://mm.forbidden.gg:1338 | *write protected* | Specifies the Warfork Matchmaking Servers |
| model | bigvic | <model name> | Changes your Player model. |
| name | <name> | Changes your nickname. | |
| net_showfragments | 0 | ||
| netgraph | 0 | <0/1> | If enabled, information will be displayed in the console about all network packets. |
| nextmap | match "advance" | <value> | Proceeds to the next map. |
| password | <password> | If a server requires a password, the client automatically tries to join with x password. | |
| protocol | 22 | *write protected* | |
| revision | Oct 8 2019 00:08:07 | *write protected* | Date when the game was compiled. |
| sensitivity | 3 | <value> | Changes sensitivity of your mouse. |
| showdrop | 0 | <0/1> | If enabled, information will be displayed in the console about dropped network packets. |
| showpackets | 0 | <0/1> | If enabled, information will be displayed in the console about all network packets. |
| skin | default | ||
| timedemo | 0 | ||
| timegraph | 0 | <0/1> | If enabled, a graph will be displayed, which visualizes the compression and expansion of game time, which is necessary maintain the overall game time constant. |
| timescale | 1.0 | <value> | Changes the time scale of the game. |
| tv_server | 0 | *write protected* | Tells the game if the server is a TV server. |
| version | 2.10 x64 Oct 8 2019 Win32 RELEASE | *write protected* | The version of the game. |
| zoomfov | 30 | <value> | Changes the field of view while zooming. |
| zoomsens | 0 | <value> | Changes your sensitivity while zooming.
0 = uses your normal sensitivity. |
Commands
| Command | Parameters | Description |
|---|---|---|
| +attack | Primary attack. | |
| +back | Moves backward. | |
| +forward | Moves forward. | |
| +klook | Keyboard look; +forward +back serve as +lookup +lookdown. | |
| +left | Turns left. | |
| +lookdown | Looks down. | |
| +lookup | Looks up. | |
| +movedown | Moves backwards. | |
| +moveleft | Moves left. | |
| +moveright | Moves right. | |
| +moveup | Moves up; In water, lava, etc. | |
| +quickmenu | An easily accessible menu with basic commands such as Voice Says.
By default it is bound to LSHIFT. | |
| +right | Turns right. | |
| +scores | Accesses the scoreboard. | |
| +special | ||
| +speed | Changes your speed.
If run is enabled you will walk or vice versa when used. This serves no purpose as Warfork has no footstep sounds. | |
| +strafe | When used +left and +right are changed with +moveleft and +moveright. | |
| +use | Uses an item. | |
| +zoom | Zooms. | |
| -attack | Stops primary attack. | |
| -back | ||
| -forward | Stops moving forward. | |
| -klook | ||
| -left | Stops looking left. | |
| -lookdown | Stops looking down. | |
| -lookup | Stops looking up. | |
| -movedown | Stops moving backwards. | |
| -moveleft | Stops moving left. | |
| -moveright | Stops moving right. | |
| -moveup | ||
| -quickmenu | ||
| -right | ||
| -scores | Stops accessing the scoreboard. | |
| -special | ||
| -speed | ||
| -strafe | ||
| -use | Stops using an item. | |
| -zoom | Stops zooming. | |
| addbotroam | ||
| addip | <ip address> | Adds IP addresses to the filter list. |
| addnode | ||
| alias | <alias name> <command> | Creates an alias. |
| aliasa | ||
| aliaslist | Lists all aliases. | |
| awards | ||
| bind | <key> <command> | Binds a key to a command. |
| bindlist | Lists all bound keys. | |
| botdebug | ||
| botnotarget | ||
| callvote | <vote> [argument] | Calls a vote. |
| camswitch | ||
| centerview | ||
| chase | ||
| chasenext | ||
| chaseprev | ||
| cinematic | ||
| cinepause | ||
| cinlist | ||
| clear | Clears the console. | |
| cmd | ||
| cmdlist | Lists all console commands. | |
| coach | Allows you to be a coach in some team based gametypes.
Be on the team you wish to coach before typing the command in console. | |
| cointoss | <heads/tails> | Flips a coin based on your choice and announces if you won or lost. |
| condump | <filename> | Dumps the console log to a file. |
| connect | <ip address> | Connects to a server. |
| cvarcheck | ||
| cvarinfo | ||
| cvarlist | Lists all cvars. | |
| deleteclosestnode | ||
| demo | <filename> | Loads a specific demo. |
| demoavi | Starts recording video as frames or audio as .wav file depending on cl_demoavi_audio and cl_demoavi_video. Framerate depends on cl_demoavi_fps. | |
| demoget | <ID> | Use with demolist to download recorded demos from a server |
| demojump | Jumps to a specified time in a demo. Time format is [minutes:]seconds. Use + or - in front of the time to specify it in relation to current position in the demo. | |
| demolist | Lists all demos on the Server and their ID. Can be downloaded via demoget <ID> | |
| demopause | Pauses or resumes the currently playing demo. | |
| devmap | ||
| disconnect | Disconnects from current server. | |
| downloadcancel | ||
| downloadstatus | ||
| driobide | ||
| dumpASapi | ||
| dumpuser | ||
| dynvarlist | ||
| echo | <message> | Prints a message to the console. |
| editnodes | ||
| enterqueue | ||
| envshot | ||
| exec | <filename> | Executes a configuration file. |
| fontlist | ||
| fs_checksum | ||
| fs_mtime | ||
| fs_pakfile | ||
| fs_path | ||
| fs_search | ||
| gamemap | ||
| gamemenu | ||
| gametype | Lists information about current game type. | |
| getinfo | ||
| getstatus | ||
| gfxinfo | ||
| give | ||
| glslprogramlist | ||
| god | Toggles godmode. | |
| heartbeat | ||
| help_hud | ||
| imagelist | ||
| invite | ||
| irc_connect | ||
| irc_disconnect | ||
| join | [team name] | Joins the game. Joins a specific team if specified. |
| kick | <player> | Kicks a player from the server. |
| kill | Kills the player. | |
| killserver | Kills the server process. | |
| leavequeue | Leaves the challengers queue. | |
| listip | The current list of filters will be printed to console. | |
| listlocations | ||
| listraces | ||
| listratings | ||
| lockteam | Locks the teams. | |
| makenodes | ||
| map | <map name> | Switches a map. |
| maplist | Lists all maps available. | |
| match | ||
| memlist | ||
| memstats | ||
| menu_close | ||
| menu_force | ||
| menu_modal | ||
| menu_open | ||
| menu_quick | ||
| menu_tvchannel_add | ||
| menu_tvchannel_remove | ||
| messagemode | ||
| messagemode2 | ||
| mm_login | ||
| mm_logout | ||
| modellist | ||
| music | ||
| next | ||
| nextmusic | ||
| noclip | Toggles noclip. | |
| notready | Changes status to "Not ready". | |
| op | <password> | Makes the player a game operator. |
| opcall | <vote> [argument] | Calls an instant-passing vote. |
| operator | <password> | Makes the player a game operator. |
| pausemusic | ||
| pingserver | ||
| players | Lists all players in-game. | |
| position | Displays player's current position. | |
| prevmusic | ||
| purelist | Displays a list of all Pure Files in your console. | |
| putaway | ||
| quit | Quits the game / server. | |
| racerestart | Restarts the race. | |
| rcon | <command> | Executes a server command as console. |
| ready | Makes the player ready. | |
| reconnect | Reconnects the player to the current server. | |
| record | <name> | Records a demo with the specified name(These are single POV demos, for multiPOV use serverrecord). |
| removeip | <ip address> | Removes IP addresses from the filter list. |
| requestservers | ||
| reset | ||
| s_devices | ||
| s_restart | Restarts the sound engine. | |
| savenodes | ||
| say | <message> | Sends a global message. |
| say_team | <message> | Sends a team message. |
| score | ||
| screenshot | ||
| serverinfo | ||
| serverrecord | <name> | Records a multiPOV demo on the Server (can be downloaded by clients via demolist and demoget). |
| serverrecordcancel | ||
| serverrecordpurge | ||
| serverrecordstop | ||
| set | <cvar> <value> | Changes the value of x cvar to y. |
| seta | ||
| setas | ||
| setau | ||
| setdyn | ||
| sets | ||
| setu | ||
| shaderdump | ||
| shaderlist | ||
| showclosestnode | ||
| showip | Shows your local IP Address (reversed). | |
| showserverip | Shows the server IP Address. | |
| sizedown | Decreases the viewable area (affects cg_viewSize by -10) on your screen. | |
| sizeup | Increases the viewable area (affects cg_viewSize by +10) on your screen. | |
| soundlist | Prints a list of all sounds currently loaded in your console. | |
| spec | Joins the SPECTATOR team. | |
| spectators | Prints a list of spectators. | |
| stats | <id\playername> | Prints your or a specified players stats.
Stats include hit/shot percent, damage given/received, ratio, health/armor, etc. |
| status | ||
| stop | ||
| stopmusic | ||
| svscore | <0/1> | If enabled, the scoreboard will be toggled. |
| timein | Resumes the match instantly. | |
| timeout | Pauses the match for 180 seconds. | |
| toggle | <cvar> <argument 1> [argument n] | Toggles a cvar's value between the arguments. |
| toggleconsole | Toggles the console. | |
| toggleready | Toggles "ready" status. | |
| tvconnect | Sends a command to connect to a TV server (with available slots) that has round robin balancing. | |
| ui_dumpapi | Dumps API information to console. | |
| ui_printdocs | Prints document cache to console. | |
| ui_reload | Reloads the user interface. | |
| unalias | <name> | Removes an alias. |
| unaliasall | Removes all aliases> | |
| unbind | <key> | Unbinds a key. |
| unbindall | Unbinds all keys. | |
| unlockteam | Unlocks the teams. | |
| unready | Makes the player unready. | |
| upstate | Updates your client on the current state of things. | |
| use | ||
| userinfo | ||
| vid_modelist | List of available video modes. | |
| vid_restart | Restarts the video engine. | |
| viewpos | ||
| vote | <yes / no> | Casts a vote. |
| vsay | <name> | Says a voice message globally. Shows list of all voice messages if executed without the argument. |
| vsay_team | <name> | Says a voice message to the team. |
| vstr | <variable. | Execute a variable command.
Example: vstr nextmap |
| wait | Delays the execution of a remaining command buffer until the next frame.
Example: bind z "+attack ; wait ; kill" | |
| weapcross | <0-4> | Shows weapon sets near your crosshair, which can be toggled between.
0 - View Only, 1 - Gunblade/Machine Gun, 2 - Riot Gun/Grenade Launcher, 3 - Rocket Launcher/Plasmagun, 4 - Lasergun/Electrobolt Example: bind "p" weapcross 1 |
| weaplast | Switches to last weapon. | |
| weapnext | Switches to next weapon. | |
| weapprev | Switches to previous weapon. | |
| whois | <player> | Provides player information if they're logged into Matchmaking. |
| writeconfig | <name> | Writes the current configuration to a file. |
| writeip | Writes addip\removeip <ip> commands to listip.cfg for future execution. By default filter lists are not saved\restored. |